Products

FST/FZS Split Tube Furnaces Up to 1300°C

The FST, single zone, and FZS, 3-zone, split tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1300 °C.

Request a Quote

The FST, single zone, and FZS, 3-zone, split tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1300 °C.

The split heating module allows easy positioning of the work tube or around reactors with fixed-end flanges. The split design may also allow faster cooling of the sample. Cooling channels are engineered into the housing to aid with convection cooling of the outer case. A handle is attached to the upper half of the split tube furnace with two quick-release clamps to unlock and lock the furnace safely.

The two furnace halves are ceramic fibre modules with high-quality APM wire heating elements mounted in the insulation, held in position by a ceramic holding ridge. A safety switch protects the operator by switching off the heating elements once the furnace is opened.

Customized versions and a comprehensive range of tube furnace accessories are available.

APPLICATION EXAMPLES

CIM, CVD, MIM, ageing, annealing, brazing, calcination, catalyst research, coating, degassing, drying, fuel cell testing, hardening, miniplants, pyrolysis, sintering, soldering, sublimation, synthesis, tempering, thermocouple calibration

STANDARD FEATURES

  • 1300 °C maximum operating temperature
  • Programmable temperature controller with 24 segments: FST fitted with EPC3016P1, FZS fitted with CC-T1
  • Over-temperature protection
  • Accepts work tubes with an outer diameter up to 150 mm
  • Single-zone heated lengths of 200, 500 or 1000 mm
  • 3-zone heated lengths of 500 or 1000 mm
  • Split design allows work tubes or reactors with fixed flanges to be accommodated
  • For horizontal or vertical use
  • Exceptionally long lifetime and temperature stability
  • High-grade type S thermocouple
  • Low thermal mass ceramic fibre insulation
  • High-quality 5 mm APM wire heating elements
  • Supplied with separate control box with 3 m cable, plug and socket
  • Ethernet communications

OPTIONS (SPECIFY THESE AT THE TIME OF ORDER)

  • A range of sophisticated digital controllers, multisegment programmers and data loggers with digital communication options is available – more information about controllers
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A wide choice of tube diameters and materials is available
  • For split tube furnaces, robustly shaped ceramic half tubes are available to protect the heating elements and for sample holding
  • ‘L’stand for vertical and/or horizontal use
  • Insulation plugs & radiation shields to prevent heat loss & improve uniformity
  • Modified atmosphere and vacuum assemblies are available – more information
  • Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available
  • Larger tube diameters
  • Longer heated lengths
  • Automated opening mechanism
  • Flanges for inert gas counterflow
  • Oxygen sensor for inert gas packages
  • 6 m length of cable between furnace body and control box with plug and socket
  • Gas packages with manual valve
  • Laboratory Gas Safety System for safe use with hydrogen above 750 °C
  • Gas packages with electrically operated valves for up to 3 gases

Mounting Configurations

Furnace Body and Separate Control Box Option: Vertical Stand

Subscribe

Known for service-excellence, we don’t just supply the tools, we assist you in gaining proficiency with our products through our dedicated training program.

Scroll to Top